V2 cathode bias resistor is a replacement


Note: 1k resistor is missing that feeds voltage to the power tube grids

Photo's courtesy of Mike Clark

Shared cathode on V1 220uf/820
.022 coupling caps after first stage
270k mixer resistors
Bright cap on volume pot is 250pf
556pf mixer bypass cap
No bypass cap on V2a cathode
56k/250pf tone stack combo, typical JTM45 setup
27K NFB resistor on 16ohm tap
.1 output coupling caps after phase inverter
220k bias splitter resistors
.1 cap on the presence control
All transformers are Radio Spares
Aluminum chassis

Home