Notice the repaired ohms selector


Nice China cap tube holders


Diodes have been replaced and grid resistors have been added

Shared cathode on V1
.022 coupling caps after first stage
470k mixer resistors
Bright cap on volume pot is 100pf
556pf mixer bypass cap
No bypass cap on V2a cathode
56k/250pf tone stack combo, typical JTM45 setup
27K NFB resistor on 8 ohm tap
.1 output coupling caps after phase inverter
220k bias splitter resistors
.1 cap on the presence control
All transformers are Drake
Steel chassis

Home